-
Gunsmithing
by Published on 06-19-2010 02:08 Number of Views: 44477
Here are the instructions about how to replace the trigger spring on a Weatherby MK V.
The MOD will cover all 9 lug Weatherby Rifles from 257 Weatherby Magnum and up to the 460 Weatherby Magnum.
Please be aware that this info is NOT for the 6 lug version of the Weatherby MK V.
This instructions can be used to replace or to mod the original spring.
To cut the spring is something that is out of the hands of both Weatherby.dk and Weatherby.
So if you do so, it is on your own risk!
First, ...by Published on 03-14-2010 17:42 Number of Views: 18828- Categories:
- Gunsmithing
I've posted this technique several times but can never find it when I need to reference it!! A Weatherby Forum member recently reached out to me regarding this topic and I was lucky enough to find this old thread so it wouldn't have to be re-written.
...
Originally Posted by natehunts
by Published on 01-20-2010 00:36 Number of Views: 14277- Categories:
- Gunsmithing
New Article:
The question arises regarding the method to achieve a Best Grade London finish on either a new stock, or one that is being refinished. Because the removal of an old finish, either lacquer, oil, or polyurethane, is a separate process, I'll keep the discussion ...
-
Menu 
category Navigation widget
New Weatherby owner here seeking advice
Thread Starter: bbong88Hello All, I recently purchased my my first Weatherby from my grandpa. It's a beautiful Mark V chambered in the .300 Wby. From what I learned of...
Last Post By: Dr. Vette Yesterday, 15:11